Motorcycle battery charging

Correct methods and precautions for motorcycle battery charging

Unlike conventional motorcycles that require fuel, an electric one needs to be charged properly for it to work effectively. There are several practices and things to consider when dealing with charging a motorcycle battery and some of these are highlighted below.

Although motorcycle battery charging might seem like a straightforward activity This article aims to answer some of the charging knowledge and methods involved and the precautions for motorcycle battery charging.

 
Table of Contents
youtube play button

When should I charge motorcycle battery

Most people might have different ideas as to when to properly charge a motorcycle battery but there are several things to consider first. Motorcycle battery charging is important even when the bike is not in use and this is because most batteries discharge or lose charge when left idle. This means even when the motorcycle is not in use the battery slowly drains and will need to be charged before the next ride.

Depending on the life cycle of the battery and how frequently it is used, motorcycle battery charging may need to be done at regular intervals. This will provide an adequate charge to the battery and hence prolong how well it will perform. For instance, suppose you use your electric bike every day, then the battery charging time of the motorcycle should be once every 2-3 days.

Precautions for motorcycle battery charging

While motorcycle battery charging may seem like a safe and straightforward practice, there are precautions and safety tips that need to be applied both for the safety of the user and the battery as well.

Avoid charging the battery immediately when the electric bike comes to a stop. This is a fairly common practice amongst users but it isn’t recommended as a safe practice. This is because immediately you stop riding, the battery is still hot from the ride and needs to cool down to avoid overheating when charging.

It is standard to allow the battery to cool down for about half an hour before processing with motorcycle battery charging. Also charging under direct sunlight should be avoided as this may also overheat the battery and will effectively reduce the battery life and in worse cases may lead to fire hazards like explosions.

Ensure to charge the battery at the recommended duration which may vary depending on the size and capacity of the battery. However, it is recommended that between 3 to 8 hours is the standard charge time when dealing with the average motorcycle battery charging. This should adequately charge the battery and should not be exceeded as overcharging can reduce the battery life.

Precautions for motorcycle battery charging

Ensure not to leave the charger connected to the battery at all times when the battery is not in use. This could overcharge and damage the battery if done too frequently.

Ensure to use the proper charger when charging a motorcycle battery. This is important because the voltage of the charger and the battery needs to match for proper, adequate, and safe charging. If you have a 48V battery, ensure to use a charger that is rated at 48V to avoid a mismatch that may cause an overload of current that may damage the battery.

When motorcycle battery charging is being done most users would prefer fast charging at charge stations. But while fast charging may be convenient, it is not recommended to be used frequently as the high current may lead to battery degradation and reduced efficiency.

What is the best way to charge a motorcycle battery

Before motorcycle battery charging is carried out, there are a few things you need to account for to provide the best charge for the battery. Firstly, ensure that the motorcycle is turned off and the battery is not actively in use before you begin charging.

Secondly, appropriately connect the battery charger to the charging port or battery terminals to ensure a proper connection. Ensure that there is no water or moisture at the battery terminals to avoid sparks, and use the charger paired by the battery supplier. Thirdly, charge for the recommended timeframe or until the battery is full, and be sure to disconnect the charger once charging is complete to avoid overcharging. If you use a lead-acid battery, you need to recharge it after fully discharge, otherwise the capacity will quickly drop below the rated capacity, which is the memory effect. Using lithium battery replacement lead acid will not have this situation, that is, it can be charged at any time.

What is the best way to charge a motorcycle battery

Is it better to charge a battery at 2 amps or 10 amps

Depending on the size or voltage of the battery in question, charging with a 10 amp charger will charge the battery a lot faster than if you were to have the same motorcycle battery charging with a 2 amp charger. But although a 10 amp charger is faster, excessive use of such fast charging could result in the degradation of the battery and reduced efficiency.

So, in essence, while a 2 amp charger is slower compared to the 10 amp, it is safer to use in the long run to conserve battery health.

Do trickle chargers ruin motorcycle battery batteries

A trickle charger is meant to slowly provide motorcycle battery charging at a slow pace that is make up for the power lost due to the self-discharge of the battery. Occasional use of a trickle charger should be safe for the battery and not ruin it but the charger should be disconnected when the battery is fully charged.

How long does it take to charge a 48v motorcycle battery

Motorcycle battery charging usually takes between 3 to 10 hours to fully charge but this time frame varies and is dependent on the size of the battery and the amp rating of the charger being used. We can easily calculate how long it takes a battery to charge provided we know the voltage is the battery and the amp of the charger.

In this case, we have a 48V battery rated at 10Ah and is to be paired with a 2 amp charger. The amp hour(Ah) rating of a battery tells how many amps of current the battery can provide for exactly 1 hour. So, all we have to do is divide the amp hour(Ah) of the battery by the amp of the charger in use.

10Ah ÷ 2A = 5.

In essence, the estimated time it would take to charge a 48 10Ah with a 2 amp charger is roughly 5 hours. If you require faster charging then you would need a charger with a higher amp. For example, a 10 amp charger would charge the same battery in ( 10Ah ÷ 10A = 1) in roughly 1 hour. Although charging at such fast rates is bad for the battery’s health.

How long does it take to charge a 48v motorcycle battery

The most efficient way to keep your motorcycle charged

There are different ways to effectively keep your motorcycle battery charging with the most common being that you simply charge them at home. But this method has a clear disadvantage as it requires a significant amount of time to allow the battery to fully charge. This charging time causes delay especially during the day, when people like delivery and couriers need to move from one location to another.

The best and most efficient way to keep your motorcycle battery charging is by using a dedicated battery swapping station. A battery swapping station is a location where multiple batteries are charged simultaneously and owners of motorcycle batteries can swap out their dead batteries for fully charged batteries when they run flat. Users can then get their depleted motorcycle battery charging and can return later in the day to retrieve them when they would be fully charged. These stations support charging for all battery sizes and effectively save time for each owner.

Can you charge a motorcycle battery with a regular charger

You can get a motorcycle battery charging with the use of a regular or standard charger but there is one major thing to consider. You must always ensure that the charger in question is rated to match the voltage of the motorcycle battery it is to charge. This ensures that there is no mismatch that may adversely affect the health of the battery.

For instance, if a 48v lithium ion battery is to be properly charged, a charger rated at 48V with nothing less than 2 amps should be used for effective and proper charging. This ensures that there is adequate current flow and there is no current overload which may result in a short circuit or even overheating the battery. This could be hazardous as the battery may be permanently damaged. So in the case of unsure whether it matches, be sure to use the charger provided by the battery supplier.

Can you charge a motorcycle battery with a regular charger

Why are motorbike swapping battery stations so popular

When using a swapping station for motorcycle battery charging, there are some obvious advantages that have made them so popular amongst motorbike owners. One major advantage is that they save time. Using a swapping station means that you save the time needed to charge the battery which would mean the motorbike would not be usable during that period.

By simply being able to swap out a fully charged battery you get back the time that would have been needed to charge your depleted flat battery. Another major advantage why swapping stations are popular for motorcycle battery charging is that they are super convenient and high security. If you want to know more about the power exchange cabinet, you can check the battery swapping station business model article.

Related post

1 thought on “Correct method and precautions for motorcycle battery charging”

  1. I like that you pointed out how motorcycle battery charging is important even when the bike is not in use and this is because batteries discharge or lose charge when left idle. The battery on my motorcycle is already pretty old and I think it is about to lose charge soon. I should probably look for a motorcycle battery charger for sale soon since I do not want to completely replace the battery yet.

Leave a Comment

Your email address will not be published. Required fields are marked *

tycorun logo

TYCORUN ENERGY

We offer lithium ion battery products, solutions, and services across the entire energy value chain. We support our customers on their way to a more sustainable future.

Products

Recent Posts

Hot Posts

Contact Form Demo (#3)
Scroll to Top

Request A Quote

Email:info@takomabattery.com