Top 30 commercial energy storage systems products in China in 2023
In the last two years, policies have been pursued in various parts of China to encourage industrial and commercial users of 10 kilovolts or above to directly participate in the electricity market, and gradually reduce the scope of electricity purchasing agents.
Under this background, a large number of industrial and commercial users have a demand for energy storage systems, and the economy of industrial and commercial energy storage systems is emerging.
Chinese manufacturers, including the top 10 lithium ion battery manufacturers, have been launching industrial and commercial energy storage systems to meet the market demand. This article lists the top 30 commercial energy storage systems products in China in 2023.
Top 30 commercial energy storage systems products in China in 2023
Optim Energy – Ocube Series
Product Features:
- – Support elastic capacity expansion
- – Easy to transfer
- – Customizable capacity storage, meets customers’ different requirements
Specification parameters:
Tycorun – TG Boxhev series
Tycorun’s TG Boxhev series:
Product Features:
- – Support a variety of communications, can communicate with a variety of inverters
- – Products cover 10-25KWH capacity segment
- – Support parallel connection andexpansion
- – Simple appearance design, easy installation
Specification parameters:
RCT Power – Lable series
- – Based on advanced model design and vehicle gauge level software development process
- – Mature equalization technology and thermal management technology, cycle life is long
- – Support multi-domain features extraction, health status identification, easy to maintain
Model name | CESS l200 | CESS l1000 | CESS l2000 |
---|---|---|---|
Capacity | 200kWh | 1000kWh | 2000kWh |
Rated output power | 100kW | 500kW | 500kW |
Rated output voltage | 380V | 380V | 380V |
Rated output frequency | 50Hz | 50Hz | 50Hz |
Grid type | 3L+N+PE | 3L+N+PE | 3L+N+PE |
Battery type | LFP | LFP | LFP |
Thermal control | Liquid cooled | Air cooled | Air cooled |
Fire safety system | Flammable gas detector, exhausting system, smoke sensing, sound and light alarm, overall immersion | Flammable gas detector, exhausting system, smoke sensing, sound and light alarm, overall immersion | Multi-level early warning, heptafluoropropane, water spray, flammable gas detector, exhausting system |
EMS | Centralized | Centralized | Centralized |
Relative humidity | 0%~95%, non-condensing | 0%~95%, non-condensing | 0%~95%, non-condensing |
Operating temperature | -20°C~+50℃ | -20°C~+50℃ | -20°C~+50℃ |
Operating altitude | ≤2000m | ≤2000m | ≤2000m |
Cabinet dimensions | W1500xH2250 xD1440mm | W6058xH2896 xD2438mm | W9144xH2896 xD2438mm |
Anticorrosive level | C4-default,C5- optional | C4-default,C5- optional | C4-default,C5- optional |
Cabinet weight | 2.85T | 19.5T | 31T |
Protection level | IP55/NEMA 3R | IP54 | IP54 |
Cycle life | CATL≥7500 @25°C 0.5C | CATL 7500 @25℃ 0.5C | CATL 7500 @25°C 0.5C |
Floor space | 5㎡ | 30㎡ | 40㎡ |
Communication interface | Modbus TCP | Modbus TCP | Modbus TCP |
HMI | Cloud,web,lCDtouch screen display | Cloud,web | Cloud,web |
BYD – outdoor commercial energy storage system
BYD’s Outdoor commercial energy storage system:
Product Features:
- – The minimum grid-connected unit is 120kW and the maximum can be extended to MW class
- – Can be applied to traditional power generation, renewable energy, auxiliary services and distributed energy
- – High level protection, can be used outdoors
Spacification parameters:
Model name | OSN-P120B274-U-R1M01 |
---|---|
Discharge power | 120kVA |
Charging power | 120kVA |
Rated AC voltage | 480VAC |
Voltage range | 422VAC~528VAC |
Rated grid frequency | 60Hz |
Grid frequency range | 58~60.5 |
Maximum output current | 160A |
Ambient temperature | -20℃~+40℃ |
Relative humidity | 5~95% |
Maximum altitude | ≤2000m |
Protection level | IP54 |
Seismic level | High(IEEE-693-2005) |
Wind resistance | 150mph per asce 7-10 |
Temperature control | Intelligent air conditioning cooling/mandatory air cooled |
Noise | <75dBA |
BOL cycle efficiency | ≥88.2% |
Dimensions | W1690xD1900xH2300mm |
Weight | 3100kg |
Sermatec – Cube series
Sermatec’s Cube series:
Product Features:
– Support power grid voltage regulation, three-phase unbalanced load, harmonic governance
– Support peak cutting and valley filling
– Support load tracking to improve power quality
Spacification parameters:
Model name | Cube215 | Cube232 |
---|---|---|
Rated power | 100kW | 100kW |
Maximum output power | 110kW | 110kW |
Rated grid voltage | 380V | 380V |
Grid voltage | -15-15% | -15-10% |
Battery system configuration | 1P240S | 1P260S |
Battery system capacity | 215kWh | 232kWh |
Max rate of converter | 99% | 99.05% |
Fire safety system | Aerosol + perfluorohexanone | Aerosol + perfluorohexanone |
Dimensions | W141xD1450 xH2180mm | W1400xD1350 xH2150mm |
Weight | 2700kg | 2500kg |
Operating temperature range | -35~55℃ | -35~60℃ |
Operating humidity range | 0~95%,non-condensing | 0~95%,non-condensing |
Protection level | IP54 | IP54 |
Temperature control | Liquid cooled | Liquid cooled |
Gotion – Smart one
Gotion’s Smart one:
Product Features:
- – Have superior charging and discharging strategy design, cycle life is long
- – Support multi-level warning and real-time monitoring
- – Support dual-circuit redundant power supply. When AC power is lost, it can be seamlessly switched to DC power supply
- – Innovative DUs and PCS design, volume energy density is 50% increased
- – Extensible capacity design to meet customization requirements
Specification parameters:
NR Electric – PCS liquid cooled energy storage cabinet
NR Electric’s PCS liquid cooled energy storage cabinet:
Product Features:
- – Highly integrated, easy to transport and install
- – Advanced battery temperature control to ensure long battery cycle life
- – Small particle size of single cabinet, convenient to recharge
- – Apply fully integrated operating system and IEC-61850 protocol to locate and analyse faults
Specification parameters:
Model name | PCS-8812PB |
---|---|
Nominal capacity | 372kWh |
Rated voltage | 1331.2V |
Voltage range | 1164.8~1497.6V |
Maximum current | 176A |
Rated power | 93kW |
Maximum power | 102kVA |
Rated current | 78A |
Maximum AC side current | 85.5A |
Grid frequency | 50/60Hz |
Grid frequency range | 45~55/55~65Hz |
Weight | 4500kg |
Dimensions | W1500xH2450xD1300 mm |
Cycle life | 5000(DOD 90%, eOL 80%) |
Temperature control | Liquid cooled |
Noise | ≤75dB(1m) |
Operating temperature range | -30~50℃ |
Protection level | IP56 |
Huawei – Luna2000
- – 100% discharge depth to optimized pack energy level
- – Modular design, capacity can be expanded from 5kWh to 30 kWh
- – Light weight of the body and battery module, makes it easy to install
- – Apply the new Huawei inverters which can be automatically detected and quickly started from Huawei Solar App
Model name | LUNA2000-4.95-5 | LUNA2000-4.95-10 | LUNA2000-4.95-15 |
---|---|---|---|
Capacity | 5 kWh | 10kWh | 15kWh |
Battery type | Lithium iron phosphate (LiFe battery) | ||
Rated voltage | 385 v | ||
Maximum input/output voltage | 560 v | ||
Voltage range | 350 v–560 v | ||
Input/output rated power | 1.5 kW | 3 kW | 4.5 kW |
Maximum input/output current | 4.5 a | 9 a | 13.5 a |
Rated power usage time | (self-supporting output) 120 points, (grid-tied output) 60 points | (self-supporting output) 240 points, (grid-tied output) 120 points | (self-supporting output) 360 points, (grid-tied output) 180 points |
Display | SOC charging status indicator (LED), FusionSolar APP | ||
Communications RS485 | CAN | ||
Dimensions (W*H*D, mm) | 670x600x150 | 670x960x150 | 670x1320x150 |
Weight of the battery (Including floor mounting base) | 63.8 kg | 113.8 kg | 163.8 kg |
Service life | 20 years | ||
Warranty | 10 years (free) 15 years (paid) | ||
Charge / discharge cycle | 15 years (Charge / discharge cycle test) | ||
Cooling mode | Free cooling | ||
IP rating | IP65 | ||
Operating temperature | –20°C to +55°C | ||
Maximum operating altitude | 5%–95% RH | ||
Maximum operating altitude | 4000 m |
Hoenergy – iESS all-in-one cabinet
Hoenergy’s smart ESS all-in-one cabinet:
Product Features:
– Equipped with three-stage fire protection system to ensure all-round protection from inside to outside
– Apply independent single cluster battery without circulation to reduce power loss
– Support demand side response and virtual power plant
– Highly integrated, easy to transport and install
Specification parameters:
Model name | iESS-CAB-W200H | iESS-CAB-W115H |
Battery type | LFP | LFP |
Cell capacity | 3.2V/280Ah | 3.2V/150Ah |
System battery configuration | 1P2245 | 1P240S |
Battery ratedcapacity | 200kWh | 115.2kWh |
Battery rated voltage | 716.8V | 768V |
Battery voltage range | DC560-817.6V | 600V-876V |
Charge / discharge rate | Rated0.5C | Rated0.5C |
Discharge depth | 90% | 90% |
Battery temperature control | Air cooled | Air cooled |
AC rated power | 100kW | 50kW |
AC maximum power | 110kW | 55kW |
Total harmonic distortion | when <3%Rated power | when <3%Rated power |
DC component | <0.5%output rated current | <0.5%output rated current |
AC rated voltage | 380V AC | 380V AC |
Grid voltage range | 320V-460V | 320V-460V |
AC input method | 3P+N+PE | 3P+N+PE |
Rated grid frequency | 50/60Hz | 50/60Hz |
Power factor range | 0.98(lead)-0.98(lag) | 0.98(lead)-0.98(lag) |
Off-grid operating | support | support |
Dimensions(W*D*H) | 1880x1000x2500mm | 1600x1200x2000mm |
Weight | 2.4t | ≈2.0t |
Protection level | IP54 | IP55 |
Anti-corrosion grade | C5 | C5 |
Operating temperature range | -20°C-60℃ | -20C~60℃ |
Temperature range | -30C~60℃ | -30C~60℃ |
Operating humidity range | ≤100% | ≤100% |
Battery temperature control | Industrial-class temperature control, air conditioning cooling | Industrial-class temperature control, air conditioning cooling |
Fire safety system | Pack aerosol +perfluorohexanone +fire safety interface | Pack aerosol +perfluorohexanone +fire safety interface |
Operating altitude | 3000m(capacity reduced when>3000m) | 3000m(capacity reduced when>3000m) |
Converter temperature control | Air cooled | Air cooled |
Huafon – IC1 series
Huafon’s IC1 series:
Product Features:
– Support demand side response. Users can obtain subsidies by responding to the dispatching of power grid companies
– In case of power failure, provide backup power to ensure continuous production
– Reduce the maximum load to cut down the investment cost of increasing transformer capacity
– Reduce the cost of electricity by charging during the trough period and discharging during the peak period.
Hyper Strong – liquid-cooled AIO
Hyper Strong’s liquid-cooled AIO:
Product Features:
– High safety with battery pack protection level up to IP67, packet level directional fire protection and reserved water fire interface
– Support virtual power plant, grid-connection and off-grid operation
– Standardized interface and flexible access
– Modular design, multi-machine parallel, easy to expand capacity
– Real-time leakage monitoring and intelligent replenishment, easy to maintain
– Support mobile remote monitoring
Specification parameters:
Model name | HyperL2-R233 | HyperL2-R372 |
Cell | LFP-280Ah | LFP-280Ah |
Combination type | 1P260S | 1P416S |
Nominal capacity | 232.9kWh | 372.7kWh |
Rated charge/discharge power | 100kW | 186kW |
AC output voltage | 380V | 690V |
Protection level | IP55(Battery pack iP67) | IP55(Battery pack iP67) |
Fire safety system | Perfluorohexanone/Aerosol optional | Perfluorohexanone/Aerosol optional |
Dimensions | 1300x1300x2340mm | 1300x1300x2340mm |
Weight | 2600kg | 3500kg |
JD Energy – eBLOCK series
JD Energy’s eBLOCK series:
Product Features:
– Safe and controllable with safety monitoring, early warning design and pack-level immersion patented fire technology
– System conversion efficiency is over 91% with single battery string design, efficient multilevel topology and efficiency optimal fitting technology
– Support to access energy clouds eMind via WIFI, 5 g and LAN
– Multiple cabinets can be connected to expand capacity
Specification parameters:
Model name | eBlock-172S | eBlock-172P | eBlock-200S | eBlock-200F |
Cell type | LFP 120Ah | LFP 280Ah | ||
Battery pack configuration | 12.288kwh/2P16S | 14.336kwh/1P16S | ||
Battery system configuration | 172kWh/2P224S | 200kWh/1P224S | ||
Battery voltage range | 627~806V | |||
AC rated power | 58kw | 86kw | 58kw | 100kw |
AC maximum power | 62.5kw | 103kw | 62.5kw | 120kw |
AC current aberration rate | <3% | <3% | <3% | <3% |
DC component | <0.5%lpn | <0.5%lpn | <0.5%lpn | <0.5%lpn |
Grid voltage range | 380V | 380V | 380V | 380V |
Power factor adjustable range | -1~1 | -1~1 | -1~1 | -1~1 |
Rated grid frequency | 50Hz | 50Hz | 50Hz | 50Hz |
System rate | ≥91% | ≥89% | ≥91% | ≥89% |
Charge / discharge rate | ≤0.36C | ≤0.5C | ≤0.25C | ≤0.5C |
Discharge depth | 100%DOD | |||
System voltage standard | TN380V | |||
Cycles | ≥8000 | |||
Charge / dischargeswitching time | < 100ms | |||
Communication interface | LAN | |||
Protection level | IP55 | |||
Temperature control | Air cooled | |||
Operating temperature | -35~55℃ | |||
Relative humidity | 5~95% rH,non-condensing | |||
Noise | <70db | |||
Altitude | s2000m | |||
System dimensions(W*H*D) | 1400*2200*1050mm | 1200*2350*1050mm | ||
Fire safety system | Aerosol+PACK class immersion+warning | |||
Weight | 2500Kg | 2600Kg |
Jinko Solar – Sun Giga
Jinko Solar’s SunGiga :
Product Features:
– Equipped with 8 liquid-cooled designed battery modules, easy to expand system capacity
– Support intelligent monitoring and linkage
– System performance is improved with an efficient thermal management system
– Turn-key system applied to extend battery life
– Highly integrated, easy to transport
– Multiple running modes are available, and the software can be customized and upgraded
Specification parameters:
Model name | JKE344K2HDLA |
Battery type | LFP-280A |
Cell | 3.2V/280Ah |
Maximum charge / discharge power | 0.5P |
Cell compound mode | 1P384S |
Rated power | 344kWh |
Rated voltage | 1228.8V |
Voltage range | 1075.2V-1382.4V |
Available capacity | 95%(100%DOD)@2±3℃,0.5P |
Charge / discharge rate | ≥94%@25±3℃,0.5P |
Temperature control method | Liquid cooled |
BMS communication interface | CAN/RS485/LAN |
Ambient temperature | -20℃~50℃ |
Ambient humidity | ≤95%RH,non-condensing |
Altitude | ≤3000m |
Noise | ≤80dB(A)@1m |
Protection level | IP54 |
Storage temperature | -20℃~45℃ |
Fire safety | PM200/Novec1230/Aerosol |
Anti-corrosion grade | C5 (EN iSO 12944) |
Communication interface | Ethernet |
Dimensions(W*D*H) | 1300X1300X2300mm |
Weight | ≈3T |
Certification | IEC62109,UL9540A,GB/T 36276,GB/T 34131 |
Koyoe – distributed energy storage system
Koyoe’s distributed energy storage system:
Product Features:
– Modular design, support multi-machine parallel, capacity can be expanded
– Off-grid operation is available, support emergency power supply and three-phase unbalance load
– Support a variety of protection including intelligent air cooling to reduce temperature rise
– Support GPRS/WIFI/RS485/USB, remote monitoring is available
Specification parameters:
Model name | KY-30KW-130KWH | KY-40KW-172KWH | KY-50KW-215KWH | KY-60KW-215KWH |
Iutput parameters | ||||
Maximum iutput voltage | 1000V | |||
MPPT operating voltage range | 180-900/630V | |||
Maximum iutputPower | 36W | 48W | 60W | 72W |
Rated iutput voltage | 630V | |||
Maximum iutput current | 36A/36A/36A | 36A/36A/36A/36A | ||
Maximum short circuit current | 42A/42A/42A | 42A/42A/42A/42A | ||
Grid-connected port parameters(AC) | ||||
Rated power | 30000W | 40000W | 50000W | 60000W |
Maximum power | 30000VA | 40000VA | 50000VA | 60000VA |
Rated voltage | 400V,3L/N/PE | |||
Rated frequency | 50Hz/60Hz | |||
Maximum current | 45A | 60A | 75A | 87A |
Power factor range | 0.8 ind…0.8 cap | |||
UPS port parameters(AC) | ||||
Rated voltage | 400V,3L/N/PE | |||
Rated frequency | 50Hz/60Hz | |||
Rated output current | 45A | 60A | 75A | 87A |
Rated output power | 30000W | 40000W | 50000W | 60000W |
Maximum output power | 30000VA | 40000VA | 50000VA | 60000VA |
Peak power | 36000/10sW | 48000/10sW | 60000/10sW | 72000/10sW |
Maximum output power(VA) | 10000VA | 13000VA | 17000VA | 20000VA |
Grid-connected/ off-grid switching time | <10ms | |||
Operating voltage range | 432V-518V | 576V-691V | 720V-864V | 720V-864V |
Charge / discharge power | 30000W | 40000W | 50000W | 60000W |
Maximum charge / discharge current | 100A/100A | |||
Rated capacity | 130KWH | 172KWH | 215KWH | 215KWH |
Available capacity | 120KWH | 160KWH | 200KWH | 200KWH |
Dimensions (W*D*H) | 1200*1200*2200mm | |||
Protection level | IP54 |
Teplore – Tensorpack
Teplore’s Tensorpack:
Product Features:
– Multilevel AC/DC automatic circuit breaker protection combined with fire protection system to ensure equipment safety
– Reduce the auxiliary power consumption with high performance thermal management system and low power control system
– Single equipment covers an area of less than 2m², shipped as a complete machine, easy to transfer
MS Energy – industrial and commercial energy storage system
MS Energy is a high-tech enterprise focusing on battery safety pre-diagnosis technology, providing customers with solutions for green energy construction, operation and management.
MS Energy’s industrial and commercial energy storage system:
Product Features:
– No parallel capacity loss, and the actual available capacity is 5% increased
– Stable PCS to support 100% three-phase unbalanced load
– Dual-redundancy design, dual control via software and hardware to ensure safety
– With short-circuit main switch control, ensure safe isolation of electrical appliances
– Isolated air ducts, and cold and hot zones are separated to achieve smart, low-carbon and thermostatic operation
Specification parameters:
Model name | MSGES-100/215-402-A1 |
Cell specification | LFP 3.2V/280Ah |
Battery pack | 1P16S |
Battery system | 1P2405 |
Battery system operating voltage | 600-876V |
Nominal capacity | 215kwWh |
Rated power | 100kW |
Maximum power | 110kW |
Rated voltage | 400VAC |
Rated frequency | 50/60HZ |
Power factor | -1.0~+1.0 |
Voltage harmonic | <3%(Rated power) |
Output method | 3P3W |
Rated charge / discharge rate | 0.5C |
Depth of charge / discharge | 90%DOD |
Maximum system efficiency | >91% |
Cycles | -8000 |
Charge / discharge switching time | <100ms |
Operating temperature | -25~55℃ |
Operating humidity | 5~95%RH,non-condensing |
Protection level | IP55 |
Temperature control method | Air cooled |
Communication interface | LAN/4G/RS485 |
Fire safety method | Perfluorohexanone |
Dimensions | 1754(W) *100(D)*2338 (H) mm |
Weight | 2500kg |
Megarevo – outdoor energy storage system
Megarevo’s Outdoor energy storage system:
Product Features:
– Highly integrated, small size, easy installation, operation and maintenance
– IP54 protection grade, stronger environmental adaptability
– Support peak shaving and valley filling, and dynamic expansion of transformers
– Built-in fire extinguishing , temperature control, early warning system
– Intelligent control system, which can be connected to the local monitoring system for unified management and control the system
Specification parameters:
Model name | Outdoor energy storage system |
Battery capacity(kWh) | 100-200 |
Battery number | 1-2 |
BMS Communication interface | RS485/CAN |
DC voltage range(V) | 420-850 |
Rated AC power(kW) | 30-150 |
Maximum AC power(kW) | 30-150 |
Rated AC current(A) | 43-216 |
Maximum AC current(A) | 48-238 |
DC currentcomponent | <0.5% |
Total harmonic distortion | <3%(Rated power) |
Rated grid voltage(V) | 400 |
Grid voltage range(V) | 320-460 |
Rated grid frequency(Hz) | 50/60 |
Grid frequency range(Hz) | 45-55/55-65 |
Power factor | 1 lead -1 lag |
Protection level | IP54 |
Fire safety system | Support |
Operating temperature range | -30°C~55℃ |
DimensionsW*D*H (mm) | Customized*1300*2400 |
Weight(kg) | Customized |
BMS communication interface | CAN, rS485 |
EMS communication protocols | RS485, TCP/IP |
PCS Temperature control method | Intelligent air cooled |
Battery unit temperature control method | Air cooled |
Maximum altitude | 4500m |
CATL – Enerone
CATL’s EnerOne:
Product Features:
– Frequency conversion liquid cooling system, temperature difference of the battery cluster can be controlled within 3°C to improve battery life
– Covers an area of only 1.69 square meter, transfer as a complete cabinet to reduce the cost of installation.
– IP66 protection level, can adapt to the ambient temperature of -30℃~55 ℃
Specification parameters:
Model name | Enerone |
Type | 1P52S*8 |
Cellcapacity[Ah] | 280 |
Nominal voltage[V] | 1331.2 |
Nominal capacity[kWh] | 372.7 |
IP level | IP66 |
Weight[kg] | 3500 |
Dimensions[LW*H][mm] | 1300*1300*2800 |
Cycle life[times] | 12000 |
Narada – Edge F series
Narada’s Edge F series:
Product Features:
– Modular structure, flexible combination
– Apply air cooling temperature control technology, AC/DC temperature management
– IP55 protection level with multidimensional warning system to ensure the safety
– Apply large capacity batteries, designed life is 15 years
– Support remote monitoring with cloud synergy and digital twin technology
– Support emergency power supply
Specification parameters:
Model name | Edge 1000-280-230F |
Battery rated capacity | 280Ah |
DC side rated voltage | 728V~936V |
Maximum charge / discharge rate | 0.5C |
DC side rated capacity | 233kWh |
DC charge / discharge rate @ rated power | 934-954 |
Battery type | LFP |
Calendar life | 20 years |
Fire safety system | Gas + (water spray optional) |
Temperature control method | Air cooled(AC system)/air conditioning cooling(DC system) |
Certification | UL9540/UL9540A/CE/IEC/KC/KBIA |
Weight | ≈3T |
Dimensions(W*H*D) | 1600*2676.5*1200 |
Protection level | IP56 |
Operating temperature range | -20-55°C |
Communication interface | RS485/CAN/LAN/4G |
Communication protocols | ModBus TCP/ModBUs rTU/CAN |
Rebestec – industrial and commercial energy storage system
Rebestec’s industrial & commercial energy storage system:
Product Features:
– IP54 protection level, can adapt to the temperature of -20℃~50 ℃
– Configured industrial liquid cooling unit to control battery temperature
– The built-in battery bank support online operation, foresee the changes of battery status
– Modular design, easy to replace battery/ expand system capacity
– Support remote monitoring on APP side, to reduce time and cost of maintainance
– Support peak clipping and valley filling, power expanding and load tracking
CVTE – commercial and industrial energy storage system
CVTE’s commercial and industrial ESS:
Product Features:
– Can adapt to most loads or AC power generation equipment
– Automatic parallel and off grid switching
– Continuous power supply for external loads
– Support rapid capacity expansion
– Support peak load shifting to arbitrage from peak and valley
Specification parameters:
Alphaess – Storion H30
Alphaess’s Storion H30:
Product Features:
– Advanced aircooling technology
– Multiple optionscharging/discharging rate: 0.25p~1p
– Multiple operation mode, automatic on/off-grid, switching within 30ms
– Easy battery installation, plug and play withoutcable connection
– High flexibility, support parallel connectionon
Specification parameters:
Model name | Storion-H30 |
Output power | 30kW |
Rated power | 96.7kWh |
Protection level | IP54 |
Charge / discharge rate | 0.25-1P |
Thermal management | Air cooled |
Battery type | LFP |
Dimensions | 1200×900×2160 |
System weight | 1.1t-1.5t |
Siny Energy – Siny bank series
Siny Energy is a innovative company focusing on product R&D production and sales in the energy storage and energy internet technology.
Siny Energy’s Siny bank series:
Product Features:
– High safety, parallel on the AC side rather than the DC side, to avoid DC short circuit
– High energy efficiency, AC discharge efficiency reaches 90%
– High integration, multiple running modes are available
– Simple maintenance and easy debugging
– Support remote monitoring
Zonergy – energy storage system Scopio
Zonergy’s energy storage system Scopio:
Product Features:
– Support multiple sets in parallel connection
– The battery capacity covering 100 kWh-900 kWh with flexible solutions to distributed energy projects with a variety of scenarios.
– Project materials can be shipped either after system integration or as individual modules for easy installation at site.
– IP55 standard of the modules, fit for a variety of application scenarios.
– Smart monitoring, remote operating, and EMS enabling various operating modes.
Specification parameters:
Sungrow – Power Stack series
Sungrow’s Power Stack series:
Product Features:
– Highly integrated ESS for easy transportation and O&M
– All pre-assembled, no battery module handling on site
– Multi level battery protection layers formed by discreet standalone systems offer impeccable safety
– Intelligent liquid cooling ensures higher efficiency and longer battery cycle life
– Modular design support parallel connection and easy system expansion
– Fast state monitoring and faults record enables pre-alarm and faults location
– Integrated battery performance monitoring and logging
Specification parameters:
Elecod – outdoor energy storage cabinet
Elecod’s outdoor energy storage cabinet:
Product Features:
– Highly integrated, easy to arrange on site
– Outdoor cabinet protection design, protect from dust and rain
– Apply virtual synchronous technology, support remote monitoring and off-grid switching
Specification parameters:
Model name | 50kW/100kwh | 100kW/200kWh | 100kW/215kwh |
Battery rated energy storage capacity | 100kWh | 200kWh | 215kWh |
System rated voltage | 844.8V | 716.8V | 768V |
Battery type | LFP | ||
Cell capacity | 120Ah | 280Ah(CATL) | 280Ah |
Battery pack combination | 1P*24S*11S | 1P*14S*16S | 1P*20S*12S |
Rated AC power | 50kW | 100kw | 100kW |
Rated AC current | 72A | 144A | 144A |
Rated AC voltage | 400V,3P+N+PE,50Hz | ||
Total harmonic distortion | <3%(Rated power) | ||
Power factor adjustable range | -1lead~+1lag | ||
Protection level | IP54 | ||
Isolation mothod | No isolation(transformer is optional) | ||
Operating temperature | -25~60°C(capacity reduced when>45°C) | ||
Altitude | 3000m(capacity reduced when>3000m) | ||
Communication interface | RS485/CAN 2.0/Ethernet / dry contACt | ||
Dimensions(W*D*H) mm | 1200*1000*2150 | 1850*1000*2300 | 1800*1200*2300 |
Weight (including battery) | 1750kg | 2350kg | 2400kg |
Chint Power – outdoor energy storage cabinet
Chint Power’s outdoor energy storage cabinet:
Product Features:
– Modular structure, flexible combination
– Integrated industrial air conditioner, to enhance battery life
– Flexible cell clusters configuration and PCS one-to-one connection, avoid uneven flow between clusters
– Ground-fault detection and interruption circuit
Specification parameters:
Model name | CPS eS- 52.5kW/239kWh | CPS eS- 105kW/239kWh |
Rated voltage | 998.4VDC | 998.4VDC |
Battery voltage range | 873.6~1123.2VDC | 873.6~1123.2VDC |
Nominal batterycapacity | 239kWh | 239kWh |
Rated AC output power | 52.5kw | 105kW |
Maximum AC output power | 57.8kVA | 115.5kVA |
Rated AC output voltage | 3Φ/PE,400VAC | |
Output voltage range | -15%,+15% | |
Maximum AC output current | 83A | 166A |
Rated output frequency | 50Hz | |
Output frequency range | 47~51.5Hz | |
Power factor | -1~+1 | |
Total harmonic distortion | <3% | |
Protection level | IP54 | |
Temperature control method | Battery:air conditioning cooling PCS: mandatory air cooled | |
Operating temperature | -20~40°C | |
Operating humidity | 0-95%,non-condensing | |
Operating altitude | <2000m | |
Display | Touch screen | |
Communications | RS485, ethernet | |
Dimensions(WxHxD)(mm) | Battery cabinet:2055x2280x1175 PCS cabinet:1497x2280x1360 | |
Weight(t) | Batterycabinet:2.9 PCS cabinet:1.2 |
TMR Energy – PowerON D series
TMR Energy’s PowerON D series:
Product Features:
– IP55 protection level, independent temperature control of thermal management system to meet the demand of most scenarios
– Fire control design applied on pack and system, support thermal monitoring to improve the system security
– Inverter controlled by EnLink, can achieve the parallel of distributed energy storage system
– Highly integrated, easy to transfer
Specification parameters:
Xizi Boostess – Boostpower / Energycube
Xizi Boostess’s Boostpower and Energycube:
Product Features:
– Peak load shifting
– Off-grid backup
– PV application
– Dynamic expansion
Specification parameters:
Infy Power – industrial and commercial energy storage system
Infy Power’s industrial and commercial energy storage system:
Product Features:
– Cabinet design, support multi-machine combination to achieve capacity expansion
– Level 4 fire protection system to ensure battery safety
– Intelligent thermal management system, to control the temperature difference between the battery cells, improving the operating life of the battery
Specification parameters: